12″ Wood Disc Sander DS-12B

The DS-12B wood disc sander(12″) has a large base that comes with 4 fixing holes for bolting it on a workbench. The DS-12B wood disc sander should be bolted to a table or suitable stand before sanding workpieces.

Moreover, a tilting table is installed on one side with 12″ round sandpaper. The tilting table is hinged with front & rear trunnion at both ends and is adjustable from -15 degrees to 45 degrees. A T-slot is designed for a miter fence, so a sliding miter fence permits angled pieces to be finished and is adjustable 60 degrees left & right. Compound angles can be set by using the miter gauge in conjunction with the tilting table. Most importantly, changing the table angle should be after turn the machine off.

The DS-12B wood disc sander has a robust 750W(1hp) electric motor that turns the disc, which is specially produced to run at a slow RPM(revolutions per minute) to avoid burning during sanding.

Furthermore, this DS-12B wood disc sander has a dust port. Never use the machine without connected to a dust collector system, which should begin prior to sanding and left to run for a couple of minutes after the job has been finished.

An excellent value-for-money disc sander which is a great asset in any hobbyist’s workshop. The item is merely pressed against the revolving disc and a perfectly flat end can be quickly created in this manner. Lastly, using any non-manual powered machine is dangerous. Therefore, safely and correctly use the DS-12B wood disc sander is the most important.

Standard Features:

• Solid structure for bench or suitable stand
• Adjustable tilting table and sliding miter fence for compound angles
• 750W(1hp) electric motor
• This machine is designed for use with wood and plywood
• Easy operation and portable
• 1 self-adhesive sanding disc
• 1 miter guide
• 1/4 disc guard