Project Description

  • 12-inch slip roll SJ300
  • mini 12-inch slip roll SJ300
  • small 12-inch slip roll SJ300
  • 12-inch slip roll SJ300
  • mini 12-inch slip roll SJ300
  • small 12-inch slip roll SJ300

12-Inch Slip Roll SJ300, Sheet Metal Manual Bending Machine

HuaJu Industrial 12-Inch slip roll SJ300 is another model 12″ mini slip roll. The 12-Inch slip roll SJ300 must be mounted on a Minimum 5″ bench vise for stability and safety. This 12-Inch slip roll SJ300 is suitable for many applications. It’s because of the excellent little forming tool that won’t take up much room in the workshop or garage. Also, the 12-Inch slip roll SJ300 has a sizable capability over the entire width. Very perfectly small machine and simple to install and use.  

Share

12-Inch slip roll SJ300 machine is the optimal choice for sheet metal forming up to 12-inch. Although the 12-Inch slip roll SJ300 is compact, its structure is similar to the SJ320. The structure is very stable. Meanwhile, the 12-Inch slip roll SJ300 must be held in a minimum 5″ bench vice. 

If you want to bend soft and half-hard steel sheets and rods into beautiful curves, this is actually a tool for you. This HuaJu Industrial 12-Inch slip roll SJ300 can bend cleanly up to 1mm solid brass, copper, and aluminum. In addition, the 12-Inch slip roll SJ300 has 5 grooves for rolling out 3/64″, 5/64″, 1/8″, 5/32, and 3/16″ diameter rod, but other sizes can be produced by selecting the groove with the closest fit.

Furthermore, large handle crank and hardened, durable gearing provide you with the mechanical benefit to roll mild steel up to 20 gauge. The vice-mounted 12-Inch slip roll SJ300 features a quick-release upper roller and bushings entirely on larger slip rolls. The rear roller can be adjusted independently on one side to produce cones, it’s ideal for making 2 stroke exhausts and inlet trumpets or for model makers. The upper roller can be removed on one or both sides to remove cones, cylinders, and rings.

Standard Features:

  • Vice mounted
  • All steel construction
  • Featuring a top slip roll, five-wire grooves, and rear pinch roll
  • Rear pinch roll with an offset facility
  • Calibrated adjusting screws to top roll
  • Capacity in mild steel – 300mm x 1mm
Model NumberMax. ThicknessMax. WidthRolling Dia.Packing SizeN.W./G.W.
SJ3001mm,

20Ga

300mm,

12″

32mm,

1.25″

48*22*18cm13/14.5kg

Related Products